Ken Rader Interiors Presents- Tips on how to paint.

Many good tips and solid training on how to paint. Ken Rader Interiors offers in home color consultation in Northwest Arkansas

Ken Rader Interiors- " How to stain your deck"!

11 Keys to Staining Your Deck Like A Pro How to stain a deck By Ken Rader of Ken Rader Interiors Painter and Decorators in Northwest Arkansas. Most decks have never been treated. They look so good when they are first built and new wood is not ready to be treated. So with the passing of time we get used to the way the deck looks . Having spent many years working with paints and stains, I've seen many homeowners who end up dissatisfied with their deck staining projects. Either it didn't look as good as they thought that would, or it didn't last as long. Following these steps will help guarantee a great looking, long-lasting result. NO SHORT CUTS! Step 1: Take your Time That's right, the first step is "take your time". With every step of the staining process, take your time. When the project is completed and your tools are cleaned and put away, nothing will have had a greater impact on the quality of the job. Here's a few tips before you get started. Take your time to allow new pressure treated lumber to weather for a few months and dry out before staining it. Allow stain strippers to be left on the surface long enough to break down old finishes before you rinse it off. Take your time to prevent overspray and spills on non-target surfaces and wait to start your project until the weather forecast is favorable. Step 2: Preparation, Preparation, Preparation 1-wood-cleaner-before As the picture above shows you will need to clean the wood and get rid of as much of the gray and black that you can. Preparation is key to the final results. All wood needs to be cleaned well before staining, whether it's a brand new deck, or an older deck that's been out in the weather and needs to be re-stained. Brand new lumber needs to be cleaned to remove "mill scale". Mill scale is a crushing of the grain that takes place during the milling process. If it's left un-cleaned, it can prevent wood stains from properly penetrating into the wood surface. On an older deck, dirt, graying from the sun, mildew and old stains all need to be removed prior to staining. Sodium Percarbonate wood cleaners, also known as oxygen bleach wood cleaners, are a great choice for this step. They are highly effective at cleaning the wood, yet won't harm plant life and vegetation. Best of all, they won't hurt you either. Their soapy consistency won't burn your skin. If there is a build up of old stains on the deck then the job gets a little tougher but not impossible. Instead of a sodium percarbonate cleaner you'll need to use a stain stripper. Strippers are a little more caustic so follow the directions carefully. They work great and will remove most weathered stains in a single application. Lastly, if there are small spots of stain that won't come off during the cleaning process, they should sand off easily using a palm-type sander after the deck has dried. If those spots of stain are left on the deck, they will show through the new finish and detract from the deck's final appearance. Some stain manufacturers offer a free instructional video to help walk you through this entire process. They're a terrific tool to use to ensure that you do it right the first time. Check out a sample deck staining video here. Step 3: Brighteners are Beautiful tbrite-before-afterIn the deck staining process, no step is skipped more than this one. It's by far the easiest step to do and it will have a dramatic effect on the final results. Wood brighteners are easy to apply. They help open up the surface of the wood to improve penetration, neutralize any stain strippers that were used, and restore the appearance of old, weathered wood to like new again. That's a lot of things for one product to accomplish, but brighteners will do all of that so don't skip using them . To use them, simply spray them on, wait a few minutes, and rinse them off. No scrubbing, and no "elbow grease" needed. There are so many benefits and they're so easy, there's no reason to not use them! Step 4: Rinse like Mad Use lots and lots of water after using any cleaning chemicals. Even though some of these chemicals can seem safe and harmless, they all need to be rinsed off extremely well after they are used. Left in the wood, these chemicals can resurface over time and begin to attack and break down the new stain. So once you are done cleaning, rinse the deck thoroughly to get all of the chemicals out of the wood. Step 5: Stay Away from the Cheap Stuff Now that the deck is clean and dry, it's ready to be stained. Before you decide which stain to buy, keep in mind that you always get what you pay for. Better ingredients cost more money. If you expect premium results then you'll need to buy a premium product. There is a difference in quality when it comes to resins, pigments, mildewcides and many other materials that make up a gallon of wood stain. So stay away from the cheap stuff if you expect it to last. Step 6: Take a Look at Waterborne Stains Water based deck stains have become really popular in the last few years. If you have been reluctant to try them in the past, don't be reluctant any longer. Air quality regulations have forced manufacturers to really improve these products some are now better, more durable and longer lasting than conventional oil-based alternatives. They offer some distinct advantages to the user that oil base stains can't offer. Good quality water based stains clean up with soap and water, there are no nasty solvents to breathe, they have a significantly better resistance to weathering, the wood doesn't need to be completely dry to use them, they dry more quickly than solvents and they are much easier on the environment. Additionally, some of the waterborne stains are synthetic as well. Synthetic resin wood stains are far less susceptible to mold growth, mildew and algae. So if you're in area with a fair amount of moisture and humidity, there are some real advantages in waterborne synthetic stains. Step 7: Read the Can...Follow the Directions Every product is a little different so always read the label for directions. It only takes a few minutes and it will ensure that you have all of the right information before you get started. Pay attention to how many coats of stain to apply, how long to wait between coats, how long to wait after cleaning and how long to allow wood to weather. So read the label first and you're likely to get it right the first time. Step 8: More IS NOT always Better Decks are best stained with a semi-transparent wood stain. These types of products allow the natural grain of the wood to show through, allow the wood to naturally breathe, and are easily cleaned and reapplied. Pay attention to the directions and don't over apply these types of products. You'll end up with a beautiful, shiny finish that will probably peel off over time. When too much stained is applied a film can form, much like paint, that will no longer allow the wood to breathe. When this happens the end result will be peeling and that's a real mess. So only apply as much stain as the wood can easily absorb. Step 9: The Paint Brush is Still King There are a lot of different ways to apply the deck stain. Using a pump-up garden sprayer and roller are two popular methods. Regardless of how you apply your wood stain, keep a paint brush at hand. A paint brush will work the stain deep in to the pores of a board. The agitation and friction caused by a paint brush will cause the wood to absorb more stain. So if you are spraying or rolling the stain, always back-brush it in with a brush while the stain is still wet and you'll achieve much better penetration in to the wood. Watch the short video clip below for the best type of brush to use. Step 10: Remember...Take Your Time I told you at the start of this article to take your time. When your project is finally done, take a little extra time before you start using it. Let your deck dry out good before putting it back in use. The stain needs to cure out a bit before being subjected to the rigors of patio furniture and foot traffic. You've done everything right to this point, now make sure you allow it at least 24 hours to dry out before using it. Step 11: How about a Little Maintenance A small amount of effort can keep your deck looking great longer. Just as you would wash the dirt off of your car, wash down the surface of your deck every now and then to keep leaves and dirt from damaging the finish. If the deck stain starts to show signs of graying or loses its color, it can be easily cleaned up with a little wood brightener and a light maintenance coat of stain. That's it, that's all there is to it. Eleven keys to deck staining success. Go ahead and try them and see what the results are when you set out on your next project to do it like a pro. You may just surprise yourself! *Helpful Tips When using a wood cleaner, you can really speed the process up by using a scrub brush on the horizontal boards. These brushes can be found in the cleaning section of most home improvement stores. Get the type that can be attached to a 4 foot extension pole. With a scrub brush, cleaning the surface of the deck will be as fast as mopping your floor! When staining the deck rails take care not to splatter stain on the deck surface below as it will most likely leave unsightly darker spots when you are done. The easiest way to avoid this problem is to cover the deck below the rails as you work. I use the cardboard from the box the stain came in. You can cut out notches in the cardboard so it will fit snugly around the rail posts. ~ Hope this helps and inspires you to stain or treat you deck. It is really easy and make a big impact on the overall look of your home. Visit our web site at www.kenraderinteriors.com Ken Rader Interiors- Painters and Decorators in Northwest Arkansas As always " Happy Painting and Decorating."

Northwest Arkansas Best Painters "Painting Problems you should know about"

Click on our Banner and Visit our Web Site

Ken Rader Interiors L.L.C.  is happy to offer information all about painting and decorating.  Check out our Blog and we are sure that you will find other articles that offer information on a wide array of painting subjects.
This article will offer you some insight into some paint problems that you may have to deal with.
Peeling Paint

Another common symptom of a failed paint coat is when the paint peels off from the surface. The paint may commonly appear to curl and flake from the work surface for a number of reasons. Most commonly, the peeling occurs because of poor paint adhesion, due to improper prep work or lack of primer.
Before any new paint is applied to the exterior of your home, the surface must have the necessary "roughness" for the paint to grip to. Sanding and/or applying a layer of primer is sufficient to provide this "roughness."
Efflorescence

This condition most commonly occurs on painted masonry surfaces, such as brick or concrete. Efflorescence appears as crusty white salt deposits emerging through the paint film. This situation transpires when salts in the brick or concrete become dissolved with water, and then attach to the surface as the water evaporates.
Some common causes of paint efflorescence include moisture emanating from indoors, inadequately waterproofed below-ground walls, and poor surface preparation. If basement walls are not adequately waterproofed, ground water may penetrate the paint and induce efflorescence. Cracks in walls and other water damage are also common causes. If the concrete or mortar was not entirely cured and dried out when the paint was applied, or if prior efflorescence was not entirely removed before the last paint job, the condition may materialize.
Mildew/Mold
Another common symptom of failed paint is the appearance of mildew and mold. Mildew is easily recognized as dark green, brown, or black splotches on the paint surface, and is usually found in damp, shaded areas. Mildew is actually a living fungus which feeds and grows on paint film.

Mold spores can float through the air and form new colonies where they land. Mold and mildew have been found to cause several health problems, such as sinus problems, respiration problems, sleep difficulty, and an impaired immune system.

Mildew and mold is most commonly caused by heavy moisture, poor ventilation, and lack of sunlight. A combination of these conditions will provide an ideal habitat for mold and mildew to thrive and grow. Some of the most common areas on the exterior of your home where mildew may grow include the underside of soffits, eaves, and similar shaded areas.
Chalking

Paint chalking occurs as a formation of fine powder on the surface of the paint film. Chalking paint will rub off of the surface and get on to skin, clothing, etc. Chalking paint can also have a fading effect on the paint coat. Chalking is actually a natural cleanses process of paint, however, excessive film erosion can result in heavy chalking.
This problem is typically caused by the use of a poor quality paint, or the use of an interior paint on the exterior of the building. Before applying a new coat of paint, be sure to fully remove any excess chalk from the surface. Primer may also be needed.

KEN RADER INTERIORS L.L.C. IS PROUD TO OFFER THIS INFORMATION.  WE OFFER ARTICLES ABOUT PAINTING AND DECORATING FOR YOUR EDUCATION AND ENJOYMENT.
And this time “ How to search the Web”.
                     
WE ARE PROFESSIONAL PAINTERS AND DECORATORS IN FAYETTEVILLE ARKANSAS.
WE OFFER PAINTING AND DECORATING SERVICES THROUGHOUT NORTHWEST ARKANSAS.

FOR ALL OF YOUR PAINTING NEEDS CALL US AT (479) 443-3686
EMAIL US AT kennethrader@att.net and be sure and visit our web page at http://www.kenraderinteriors.com
  AS ALWAYS “HAPPY PAINTING AND DECORATING

Ken Rader Presents " How To Articles"

Click on the Banner and Visit our Web Page. Love to hear from you.

By Ken Rader
Professional painter and handyman with Ken Rader Interiors
During the Winter months our work load changes dramatically.  We are not able to do much painting outside and with the holidays and taxes most people put painting projects on hold to a later time.
So we find that we take on projects that are more of a support to the painting industry.  Case in point, " can you fix this or that", " How do you do this or that".
We have blogged several posts about how to decorate and paint a variety of schemes, rooms and items.  We have also shared information about  repairs and fixing things.  We hope that they have been informative and helpful.
I recently painted the house of my brother and with it came several repairs and fix-ups.  He suggested that I put together a series of  articles about " How to Fix or do ".  Sounded like a good idea to me.
Let me describe what these posts will be like.
In the 1960's I bought a VW bug and since I did not have a lot of money I was going to have to do any repairs myself.  Perhaps you have been in the same position.  So I had to purchase a " How to fix it book".  My choice was the fore runner for the Do it yourself books of today.  It was " How to repair your Volkswagen, A guide for the complete Idiot"/  It was simply called the " Idiot Book".  It was spiral bound and the only pictures were a few hand drawn illustrations.  It was the perfect book for me.  The author was very skilled at describing what you needed to do and what you would see.  He did this for the most part without pictures.
I used this book to do all of the repairs on my VW and I even used it to rebuild the engine.  Which was quite an undertaking.  I enlisted the help of my favorite Uncle who was a wonderful mechanic.  However, he worked only on American cars, Hot Rods to be exact.  All of his tools were American not Metric and his knowledge though vast was only about American cars.  So the book became our Bible.
Therefore, I will attempt to show you how to make repairs and fix things in the painting  and decorating world.  You know, How to repair Sheetrock or how to texture it.  How to remove the tank on the toilet so that you can remove the wallpaper behind it. How to replace a Tile or how which anchor should be used to hang a mirror or picture.
The difference will be that I will use pictures  of the actual project or repair.  And in the future we will use Video.
To make these " Do it Yourself" articles or posts useful for as many as possible we will ask for your suggestions.  That's right, you can leave us a comment or request about something you would like some help and advise with.  Of course it will need to be in the realm of painting, handyman and decorating, NO CAR REPAIRS.
We will post an article about every request and we will be as detailed as we possibly can.  If we post a "How To" that leaves out some information that you needed, be sure and let us know.  We will always endeavor to give all the instruction and details needed for a successful project.
Does that sound fair?  I think it will be fun.  My wife will be doing the picture taking and I think  that with her perspective and attention to detail coupled with my know how, they will be just what you need.
To get the ball rolling the first "How To" will be "How to take the Tank off of the Toilet".  This is usually left undone when painting or wallpapering in the bathroom.  Usually because we do not know how to do it.
Go ahead and start submitting your requests and we will get started.  Some weeks we may post several articles and some weeks maybe only one or two.    I look forward to hearing from you.
Here we go
Ken Rader
Ken Rader Interiors
KEN RADER INTERIORS L.L.C. IS PROUD TO OFFER THIS INFORMATION.  WE OFFER ARTICLES ABOUT PAINTING AND DECORATING FOR YOUR EDUCATION AND ENJOYMENT.
                     
WE ARE PROFESSIONAL PAINTERS AND DECORATORS IN FAYETTEVILLE ARKANSAS.
WE OFFER PAINTING AND DECORATING SERVICES THROUGHOUT NORTHWEST ARKANSAS.

FOR ALL OF YOUR PAINTING NEEDS CALL US AT (479) 443-3686
EMAIL US AT kennethrader@att.net and be sure and visit our web page at http://www.kenraderinteriors.com
  AS ALWAYS “HAPPY PAINTING AND DECORATING!”