PAINT OVER YOUR OLD WALLPAPER. YOU CAN DO IT!

Paint over Wallpaper? Yes You Can!

Stripping wallpaper is a tedious job, and sometimes it's not merely tedious, but almost impossible. If there are numerous layers, or it has been pasted to an un-painted, non-primed and un-sized wall, you simply cannot remove it without doing major damage to the underlying wallboard, requiring extensive repair. There's an easier way. It is possible to paint over wallpaper. If you do it correctly, you can hide all the seams too.

• Remove all the loose paper, taking special care around the seams. Using wallpaper seam glue, paste down any remaining loose edges.
• Prime the walls with one coat of fast-drying acrylic primer.  Use a short nap roller, one sold for smooth walls.
• Using the widest drywall knife you can, apply drywall mud over all seams and flaws. Sand smooth. Prime over all of the areas. You may need to go back and re-drywall some flaws. Take time with this step, and make sure you have good light. Use a large sanding sponge, available in paint or hardware stores, rather than sandpaper. It will be easier to get a smooth, flush finish.  Remember,” Painting over flaws or a bad finish job will only change the color, not fix the flaws”.
• Using clear or white caulking, caulk along the ceiling, baseboard and trim. This will help you get a nicer line when you cut in the edges with a brush.

Now you're ready for paint. Don t use cheap paint over all your hard work. Go to a good paint store, one that real painters use, and buy the best quality available. Use Paint and Primer combinations.  Several companies make this wonderful product. Since glossier paints will show remaining imperfections in your wall, consider some of the excellent, washable flat paints now on the market or an eggshell finish if you want luster. No matter what finish or color you choose, count on doing two coats for the best-looking, most-washable surface.
Does this sound like too much work? You can save some steps and texture your walls. No sanding required, and you can be a bit messy. Prime the walls as above, and caulk the edges. Buy a four- or six-inch flexible drywall knife and a five-gallon bucket of joint compound for an average-size room. On a scrap board or piece of cardboard, experiment with applying the compound until you have a pleasing finish. Have fun with it. If you don't like the way it's coming out, scrape it off and try again until you have a technique and finish you're happy with. Tape the trim before applying it to the walls. Once your walls are done and the texture is dry, you can use a large, wet sponge to smooth out any rough edges.
Prime the walls with premium acrylic fast dry primer. Glidden Gripper is great. Now apply two coats of your chosen finish paint, using a medium or long napped roller.
Nobody will ever know there's wallpaper under your gorgeous new paint job.
It is a lot of work for the do it yourself person.  Make it easy on yourself by using quality tools and products.  I have painted over a lot of wallpaper over the years.  For the best results you will want to consider texturing the walls.  It will hide a multitude of problems.
If you have an air compressor then all you will need is a “Texture Hopper”.  These cost about $75.00 dollars.  Be sure and mix the texture pretty thin.  Just follow the instructions on the hopper box.  There are also videos and sites on the internet that will give you more information and training for texturing.
Of course you can hire the professional.  It is money well spent and you can save your sanity.  In Northwest Arkansas “Ken Rader Interiors L.L.C.” can do you a marvelous job.  They can also advise you on whether you need to strip off the paper or paint over it with success.
As always “Happy Painting and Decorating”
Ken Rader Interiors L.L.C.
www.kenraderinteriors.com
Link us at www.facebook.com/Ken.Rader.Interiors